LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 3.5L (Lx9) >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Removal Procedure

Removal Procedure

  1. Loosen the 2 intake air duct clamps from the mass airflow (MAF) sensor and the throttle body.
  2. Disconnect the positive crankcase ventilation clean air tube from the intake duct.
  3. Disconnect the MAF sensor electrical connector.
  4. Remove the fastener that attaches the air intake duct to the upper tie-bar.
    5. Fig 1: Removing Air Cleaner Cover Fasteners
    GM1236156Courtesy of GENERAL MOTORS CORP.
  5. Remove the air cleaner cover fasteners and remove the air intake duct and air cleaner cover.
  6. Separate the air intake duct from the MAF sensor.
scientia non olet · About LEMON Manuals