LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 3.5L (Lx9) >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the manifold absolute pressure (MAP) sensor harness connector.
  2. Remove the upper air cleaner cover screws.
  3. Fig 1: Removing Upper Air Cleaner Cover
    GM1236158Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper air cleaner cover.
  5. Remove the air cleaner filter from the lower air cleaner housing.
  6. Inspect the air cleaner filter for dust, dirt and water contamination.
  7. Replace as necessary. Refer to Scheduled Maintenance in Maintenance and Lubrication.