LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Removal Procedure

Removal Procedure

    Fig 1: Removing Mounting Nut Cover From Seat Belt Adjuster
    GM1171371Courtesy of GENERAL MOTORS CORP.
  1. Remove the mounting nut cover from the seat belt adjuster.
  2. Remove the nuts from the seat belt adjuster.
  3. Remove the upper garnish molding from the center pillar. Refer to Garnish Molding Replacement - Center Pillar Upper in Interior Trim.
  4. Remove the seat belt adjuster from the vehicle.
scientia non olet · About LEMON Manuals