LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the seat belt adjuster to the vehicle.
  2. Install the upper garnish molding to the center pillar. Refer to Garnish Molding Replacement - Center Pillar Upper in Interior Trim.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing Nuts To Seat Belt Adjuster
    GM1171371Courtesy of GENERAL MOTORS CORP.
  3. Install the nuts to the seat belt adjuster.

    Tighten:  Tighten the nuts to 35 N.m (25 lb ft).

  4. Install the mounting nut cover to the seat belt adjuster.
scientia non olet · About LEMON Manuals