Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the carpet (2) to the vehicle.
- Install the left and the right quarter trim. Refer to Trim Panel Replacement - Rear Quarter - Left and Trim Panel Replacement - Rear Quarter - Right .
- Install the lower I/P cowl panels. Refer to Trim Panel Replacement - Cowl Side .
- Install the left trim panel and install the right trim panel to the side center pillar. Refer to Trim Panel Replacement - Body Lock Pillar Upper .
- Install the rear liftgate sill plate. Refer to Door Sill Plate Replacement - Liftgate .
- Install the sliding door sill plate. Refer to Door Sill Plate Replacement (Door) or Door Sill Plate Replacement (Sliding Door) .
- Install the left and the right front door sill plates. Refer to Door Sill Plate Replacement (Door) or Door Sill Plate Replacement (Sliding Door) .
- Install the anchor plate bezels. Refer to Carpet Trim Plate Replacement - Rear Floor .
- Install the rear seats. Refer to Seat Replacement - Rear .
- Install the front seats. Refer to Seat Replacement - Front Bucket .
CAUTION:
In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.