Installation Procedure

Fig 1: Installing Generator (3.5L)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the generator.
Tighten:
- Tighten the bolts to 50 N.m (37 lb ft).
- Tighten the nuts to 30 N.m (22 lb ft).
Install the generator electrical connections.
Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 3.5L.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .