LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Front Camber Adjustment >> Installation Procedure

Installation Procedure

  1. Install the strut to the vehicle. Refer to Strut, Strut Component and/or Spring Replacement in Front Suspension.

    Tighten:  Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Adjust the camber (1).

    Tighten:  Tighten the strut-to-knuckle nuts to 120 N.m (89 lb ft).

  4. Lower the vehicle.
    5. Fig 1: Adjusting Front Camber
    GM156937Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals