LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System 3.4L (Introduction)) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the fuel lines. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  2. Disconnect the throttle position (TP) sensor electrical connector.
    3. Fig 1: View Of TP Sensor & Electrical Connector
    GM69065Courtesy of GENERAL MOTORS CORP.
  3. Remove the TP sensor screws.
    4. Fig 2: Removing TP Sensor Screws
    GM201482Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor and the O-ring.
    5. Fig 3: Removing TP Sensor
    GM201473Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals