Steering Knuckle Replacement

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Steering Knuckle

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the wheel bearing/hub. Refer to Front Wheel Bearing and Hub Replacement . Separate the outer tie rod end from the knuckle. Refer to Steering Linkage Outer Tie Rod Replacement . Remove the nuts and bolts from the strut to the knuckle. Refer to Strut Assembly Replacement . Separate the lower ball joint from the knuckle. Refer to Lower Control Arm Replacement .
1	Steering Knuckle Procedure: Verify the front end alignment. Refer to Wheel Alignment Specifications .

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the wheel bearing/hub. Refer to Front Wheel Bearing and Hub Replacement .
Separate the outer tie rod end from the knuckle. Refer to Steering Linkage Outer Tie Rod Replacement .
Remove the nuts and bolts from the strut to the knuckle. Refer to Strut Assembly Replacement .
Separate the lower ball joint from the knuckle. Refer to Lower Control Arm Replacement .

Steering Knuckle
Procedure:
Verify the front end alignment. Refer to Wheel Alignment Specifications .