Installation Procedure
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear window into the opening with an assistant. Refer to Adhesive Installation of Stationary Windows (Windshield) or Adhesive Installation of Stationary Windows (Rear Window) .
- Install the sealing strip located on the bottom of the rear window.
- Connect the rear window defogger electrical connectors to the bus bars.
- Connect the connector from the radio antenna module.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.