LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 827 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC B1517 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal - BCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, Engine OFF.
Parameter Normal Value:  12.60 Volts
IBCM 1 B+ 0.00 Volts* 0.00 Volts* -
*The scan tool will not power up from the DLC if the IBCM 1 B+ circuit is open or shorted to ground.
Batt. Voltage High Res. - BCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, Engine OFF.
Parameter Normal Value:  12.600 Volts
BATT SENSE B+ 0.000 Volts 0.000 Volts -