Component Testing
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the headlamp switch.
- Test for infinite resistance between the signal circuit terminal 9 and the ground circuit terminal 8 with the switch in the Open position.
- If the specified value, replace the headlamp switch.
- Test for less than 2 ohms between the signal circuit terminal 9 and the ground circuit terminal 8 with the switch in the Closed position.
- If greater than the specified range, replace the headlamp switch.