LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement (LE5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Underhood Bussed Electrical Center (BEC) Bracket & Bolts
    GM1765457Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the underhood bussed electrical center (BEC) bracket bolts and reposition the bracket and electrical center out of the way.
    3. Fig 2: Identifying Battery Connections
    GM1593197Courtesy of GENERAL MOTORS CORP.
  3. Remove the negative battery cable ground nut (4) at the side rail stud.
  4. Remove the negative battery cable terminal (3) from the stud.
    5. Fig 3: Battery Cable Ground Terminal And Engine Harness Ground Terminal
    GM1591855Courtesy of GENERAL MOTORS CORP.
  5. Remove the negative battery cable ground terminal bolt.
  6. Remove the negative battery cable ground terminal and engine harness ground terminal from the cylinder head.
    7. Fig 4: Identifying Positive Battery Cables & Cable Components
    GM1593202Courtesy of GENERAL MOTORS CORP.
  7. Remove the negative battery cable ground nut (1) at the bussed electrical center (BEC) stud.
  8. Remove the negative battery cable terminal from the BEC stud.
  9. Remove the negative battery cable clips (4) from the wheelhouse liner.
  10. Remove the battery cable clip bolt (3).
  11. Remove the negative battery cable out through the engine wiring harness junction block bracket.
scientia non olet · About LEMON Manuals