Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of 4 Insulator Bolts That Attach BPMV To Bracket

Courtesy of GENERAL MOTORS CORP.

Install the bracket to the vehicle.

NOTE: Refer to Fastener Notice .

Install the 4 insulator bolts.
Tighten: Tighten the bolts to 10 N.m (86 lb in).

Fig 2: View Of 3 Nuts Attaching Electronic Brake Control Module (EBCM)/Brake Pressure Modulator Valve (BPMV)

Courtesy of GENERAL MOTORS CORP.

Install the 3 nuts that attach the bracket to the left front wheelhouse.
Tighten: Tighten the nuts to 10 N.m (86 lb in).
Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Lower the vehicle.