LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement (L67) >> Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical 3.8L.
  2. Disconnect the MAP sensor electrical connector and the vacuum hose.
  3. Remove the manifold absolute pressure (MAP) sensor screws.
  4. Remove the MAP sensor.
    5. Fig 1: Removing MAP Sensor (L67)
    GM12345Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals