LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System & Starting System >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

  1. Install the battery tray.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the battery tray bolts.

    Tighten:  Tighten the bolts to 5 N.m (44 lb in).

    3. Fig 1: Installing Battery Tray
    GM461887Courtesy of GENERAL MOTORS CORP.
  3. Install the battery. Refer to Battery Replacement .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals