Removal Procedure
- Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement
in Body Front End.
- Remove the wiper motor water deflector. Refer to Wiper Motor Water Deflector Replacement .
- Using the J 39232
(see Special Tools ), disconnect the wiper transmission from the wiper motor crank arm to aid in the removal of the wiper drive system module.
Courtesy of GENERAL MOTORS CORP.
- Remove the wiper drive system module screws.
- Disconnect the wiper motor electrical connector.
- Remove the wiper drive system module from the vehicle.
Courtesy of GENERAL MOTORS CORP.