Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: If one battery requires replacement, the other batteries also are to be replaced.

Fig 1: Identifying Generator Battery Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement .
Remove the generator battery cable nuts (1-4) from the battery cable terminals.

Fig 2: View Of Generator Battery Cables & Batteries

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Note original routing of battery cables to ensure proper installation.

Remove the generator battery cables (1-4) from the batteries.

Fig 3: View Of Generator Battery Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the generator battery bolts.
Remove the generator battery (1).

Fig 4: View Of Generator Battery Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

If required, remove the generator battery temperature sensor from the battery.