LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different car >> Section 1116 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Stabilizer Link At Strut Assembly
    GM851723Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Connect the stabilizer link to the strut assembly and tighten to 65 N.m (48 lb ft).
  2. Connect the stabilizer link to the stabilizer shaft and tighten to 65 N.m (48 lb ft).
  3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals