Removal Procedure
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
- Disconnect the washer pump electrical connector.
- Disconnect the washer pump hose (2) from the washer pump (5).
- Using a small flat-bladed tool, remove the washer pump from the washer solvent container (1).
- Drain the windshield washer solvent into a clean suitable container.
- Using a small flat-bladed tool, remove the washer pump terminal seal (6) from the washer solvent container (1).