Circuit/System Testing
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the TAC module.
- Ignition ON, test for 8.0-9.0 volts between the signal circuit terminal 4 and ground.
- If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the PCM.
- If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the PCM.
- If all circuits test normal, replace the TAC module.