Cruise Control Inhibited

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

The ECM/PCM inhibits the cruise control operation when any of the following conditions exist:

The ECM/PCM has not detected a brake pedal activation from the body control module (BCM).
A Cruise Control System DTC has been set.
The vehicle speed is less than 40.2 km/h (25 mph).
The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.
The engine RPM is too low.
The engine RPM is too high.
The vehicle speed is too high.
The system voltage is not between 9-16 volts.
The Antilock Brake System (ABS)/Traction Control System (TCS) is active for more than 2 seconds.