Park/Turn Signal Lamp Replacement

WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Park/Turn Signal Lamp

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Preliminary Procedure: Remove either the LF or RF wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (Turbo) or Front Wheelhouse Liner Replacement (Base) .
1	Front Park and Turn Signal and Fog Lamp Assembly Screws (Qty: 4) Tighten: 2 N.m (18 lb in)
2	Front Park and Turn Signal and Fog Lamp Assembly Tip: Disconnect and remove the electrical harness, bulbs and remove the lamp assembly from inside the front bumper fascia.