Rear Toe Adjustment
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the inner adjustment link cam nut.
- In order to adjust the toe, rotate the cam bolt. Refer to Fastener Tightening Specifications .
Tighten: Tighten the cam nut (2) to 91 N.m (67 lb ft).
- Recheck the toe setting after tightening.
- Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications .
IMPORTANT:
Complete the left and right rear toe adjustments separately, per wheel. Use the following procedure.
NOTE:
Refer to FASTENER NOTICE
.