Front Side Door Inside Handle Replacement

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Side Door Inside Handle

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
1	Front Side Door Applique Nut (Qty: 6) Tighten: 2 N.m (18 lb in)
2	Front Side Door Applique Tip: Disconnect the electrical connector.
3	Front Side Door Inside Handle Assembly Tip: Disconnect the inside handle cable from the handle assembly.