Front Side Door Window Channel Replacement

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Side Door Window Channel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement . Remove the water deflector. Refer to Front Side Door Water Deflector Replacement . Remove the front door outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement . Remove the front door inner belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement . Remove the front door window. Refer to Front Side Door Window Replacement .
1	Front Side Door Window Run Channel Screw CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Side Door Window Run Channel Bolt Tighten: 10 N.m (89 lb in)
3	Front Door Window Run Channel Procedure: Pull the run channel from the window frame to remove.