LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.4L (Introduction) >> Repair Instructions >> Idle Air Control (IAC) Valve Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the idle air control (IAC) valve electrical connector.
    2. Fig 1: View Of IAC Valve Electrical Connector
    GM69056Courtesy of GENERAL MOTORS CORP.
  2. Remove the IAC valve screws.
    3. Fig 2: Removing IAC Valve Screws
    GM185614Courtesy of GENERAL MOTORS CORP.
  3. Remove the IAC valve.
    4. Fig 3: Removing IAC Valve
    GM185583Courtesy of GENERAL MOTORS CORP.
  4. Remove the IAC valve O-ring.
    5. Fig 4: Removing IAC Valve O-Ring
    GM185626Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals