LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.4L (Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Canister Replacement >> Installation Procedure

Installation Procedure

  1. Position the canister on the fuel tank.
  2. Secure the canister to the fuel tank with a new retaining strap.
    3. NOTE: Refer to Nylon Pipes Notice in Cautions and Notices.
  3. Connect the EVAP vent hose (6), the vapor pipe (7) and the purge pipe (8) to the canister (1).
  4. Install the fuel tank. Refer to Fuel Tank Replacement .
    5. Fig 1: Locating EVAP And Fuel Tank Components
    GM699561Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals