LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the stop lamp switch (2) to the brake pedal bracket.
  2. Connect the electrical connector to the stop lamp switch.
    3. Fig 1: Identifying Brake Pedal & Stop Lamp Switch
    GM575743Courtesy of GENERAL MOTORS CORP.
  3. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment .
  4. Install the left I/P insulator.
scientia non olet · About LEMON Manuals