Removal Procedure
IMPORTANT:
Perform the radio set up procedure for new and reinstalled radios. Refer to Radio Setup .
- Remove the instrument panel cluster trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) in Instrument Panel, Gages and Console.
- Remove the screws from the radio.
- Remove the radio from the instrument panel.
- Disconnect the instrument panel wiring harness connector and the antenna cable connector from the radio.
- Remove the radio from the instrument panel.