LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Transmission >> Manual Transmission - D20 >> Repair Instructions >> Shift Rod Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Plastic Clip At End Of Ball Socket
    GM1255756Courtesy of GENERAL MOTORS CORP.
  1. Install the control shift rod into the vehicle.
  2. Press the ball sockets onto the ball studs on the linkage bolts.
  3. Connect the plastic clip on the end of each ball socket.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals