LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.5L (LBK) - Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of MAP Sensor, Connector And Mounting Bolt
    GM1375328Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the manifold absolute pressure (MAP) sensor connector.
  3. Remove the MAP sensor.
scientia non olet · About LEMON Manuals