Installation Procedure

Fig 1: Identifying CKP Sensor And Mounting Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the CKP sensor.
Tighten: Tighten the CKP sensor retaining bolt to 7 N.m (62 lb in) .

Fig 2: View Of CKP Sensor Heat Shield

Courtesy of GENERAL MOTORS CORP.

Install the CKP sensor heat shield housing.
Tighten: Tighten the CKP sensor heat shield housing bolt to 8 N.m (71 lb in) .

Fig 3: Identifying CKP Sensor Wiring Harness Connector

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of Air Filter Outlet Hose

Courtesy of GENERAL MOTORS CORP.