LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.5L (LBK) - Repair Instructions >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of CMP Sensor Connector
    GM1375178Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the camshaft position (CMP) sensor connector.
  3. Remove the CMP sensor.
scientia non olet · About LEMON Manuals