LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.5L (LBK) - Repair Instructions >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying CMP Sensor Connector
    GM1375180Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the CMP sensor.

    Tighten:  Tighten the camshaft position (CMP) sensor retaining bolt 12 N.m (106 lb in)  .

  2. Connect the CMP sensor connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals