LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System >> Repair Instructions >> Lock Replacement - Front Door >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Door Lock Screws
    GM1256819Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Connect the lock rods.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the front door lock with the screws.

    Tighten:  Tighten the front door lock screws to 8 N.m (71 lb in)  .

  5. Install the seal trim. Refer to Sealing Strip Replacement - Door Bottom .
  6. Connect the negative battery cable.