LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System >> Repair Instructions >> Door Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Door Hinges And Bolts
    GM1256846Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector and the body-to-door rubber grommet.
  2. With the aid of another technician, lightly secure the front door with the door hinge bolts.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Adjust the door for proper fit.

    Tighten:  Tighten the door hinge-to-body bolts to 20 N.m (15 lb ft)  .

    4. Fig 2: View Of Door Hold-Open Link And Mounting Bolt
    GM1256838Courtesy of GENERAL MOTORS CORP.
  4. Install the door hold-open link to the body with the

    Tighten:  Tighten the door hold-open link-to-body bolt to 25 N.m (18 lb ft)  .

  5. Connect the negative battery cable.
  6. Perform the waterleak test. Refer to Water Hose Test and Air Hose Test in Waterleaks.
  7. Check for windnoise. Refer to Air/Wind Noise in Air/Wind Noise.
scientia non olet · About LEMON Manuals