Installation Procedure

Fig 1: Identifying Door Hold-Open Link

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the door hold-open link to the door and the body with the bolts.
Tighten:
- Tighten the door hold-open link-to-body bolt to 25 N.m (18 lb ft) .
- Tighten the door hold-open link-to-door bolts to 9 N.m (80 lb in) .
Install the door seal trim. Refer to Sealing Strip Replacement - Door Bottom .