LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Instrument Cluster Trim Panel Screws
    GM1256526Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Interior Trim.
  3. Remove the instrument cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
    4. Fig 2: View Of Steering Column Screws And Electrical Connector
    GM1256527Courtesy of GENERAL MOTORS CORP.
  4. Remove the steering column upper and lower cover.
  5. Remove the nuts and the bolts securing the steering column.
  6. Disconnect the steering column electrical connector.
  7. Lower the steering column.
    8. Fig 3: View Of Head Amp
    GM1256529Courtesy of GENERAL MOTORS CORP.
  8. Remove the screw and the head amp (immobilizer de-modulator).
scientia non olet · About LEMON Manuals