LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Cutaway 4.8 V >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Repair Instructions >> Park Brake Cable Guide Replacement >> Installation Procedure

Installation Procedure

  1. Install the park brake cable guide to the park brake cable.
  2. Install the park brake cable guide.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. For cutaway vehicles, install the park brake cable guide bolt to the frame.

    Tighten:  Tighten the bolt to 18 N.m (13 lb ft).

    4. Fig 1: Park Brake Cable Guide Bolt (Cutaway Vehicles)
    GM1208291Courtesy of GENERAL MOTORS CORP.
  4. For cargo and passenger vehicles, install the park brake cable guide bolt to the frame.

    Tighten:  Tighten the bolt to 13 N.m (115 lb in).

    5. Fig 2: Park Brake Cable Guide Bolt (Cargo & Passenger Vehicles)
    GM1208287Courtesy of GENERAL MOTORS CORP.
  5. Remove the safety stands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals