Removal Procedure

CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Open and support the cargo door.
NOTE: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.
Using a flat bladed tool pry the retainer clip away from the ball stud socket.

Fig 1: Ball Stud Socket & Retainer Clip

Courtesy of GENERAL MOTORS CORP.

Remove the upper end of the assist rods from the ball stud.

Fig 2: Assist Rod Upper End

Courtesy of GENERAL MOTORS CORP.

Remove the lower end of the assist rods from the ball stud.

Fig 3: Assist Rod Lower End

Courtesy of GENERAL MOTORS CORP.

Remove the assist rods from the cargo door.
Remove ball stud bolts.

Fig 4: Ball Stud Bracket & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove ball stud bracket.