LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Cutaway 4.8 V >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Install the power seat adjuster switch (5) to the vehicle.
    2. Fig 1: Seat Cushion, Adjuster, Riser, Adjuster Switch & Motor Electrical Harness
    GM333628Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the power seat adjuster switch.
  3. Install the power seat adjuster switch to the seat cushion (1).
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screws in order to retain the power seat adjuster switch to the seat cushion.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals