LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Front Toe Adjustment

Front Toe Adjustment

    Fig 1: Jam Nut & Inner Tie Rod
    GM192067Courtesy of GENERAL MOTORS CORP.
  1. Loosen the jam nut on the tie rod (2).
  2. Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications .
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the jam nut on the tie rod.

    Tighten:  Tighten the front tie rod jam nut to 68 N.m (50 lb ft).

  4. Check the toe setting after tightening.
  5. Adjust the toe setting if necessary.
scientia non olet · About LEMON Manuals