LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure

Removal Procedure

  1. Remove the Brake Pressure Modulator Valve (BPMV). Refer to Brake Pressure Modulator Valve (BPMV) Replacement in Antilock Brake System.
  2. Remove the Brake Pressure Modulator Valve (BPMV) bracket. Refer to Brake Pressure Modulator Valve (BPMV) Bracket Replacement in Antilock Brake System.
  3. Remove the power steering fluid reservoir. Refer to Remote Power Steering Fluid Reservoir Replacement .
  4. Remove the power steering pump pulley. Refer to Power Steering Pulley Replacement .
  5. Remove the power steering reservoir outlet pipe/hose from the power steering pump. Refer to Power Steering Reservoir Outlet Pipe/Hose Replacement .
  6. Remove the power steering pressure hose from the power steering pump. Refer to Power Steering Pressure Pipe/Hose Replacement .
    7. Fig 1: Power Steering Pump Rear Bracket, Power Steering Pump & Mounting Bolts
    GM663512Courtesy of GENERAL MOTORS CORP.
  7. Remove the power steering pump mounting bolts (3) from the power steering pump (2).
  8. Remove the following components from the power steering pump rear bracket (1):
    • The power steering pump front bracket (3).
    • The power steering pump (2).
scientia non olet · About LEMON Manuals