LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Inflatable Restraint I/P Module
    GM241293Courtesy of GENERAL MOTORS CORP.
  1. Install the inflatable restraint I/P module to the cross-car beam (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the mounting fasteners (3) to the inflatable restraint I/P module.

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in).

    Use hand tools only in order to achieve fastener torque. This will prevent stripping of the replacement fastener.

  3. Install and connect the electrical harness (2) at the bussed electrical center passenger side.
  4. Install the I/P storage compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
scientia non olet · About LEMON Manuals