Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust Muffler & Rear Hanger Insulators

Courtesy of GENERAL MOTORS CORP.

Install the exhaust muffler.
Connect the exhaust muffler rear hanger insulators to the exhaust muffler.

Fig 2: View Of Exhaust Pipe & Muffler

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the exhaust muffler to the exhaust pipe.
Tighten: Tighten the nuts to 50 N.m (37 lb ft).
Remove the support from the exhaust system.
Lower the vehicle.
Inspect the exhaust system for leaks and underbody contact.