LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Rear Suspension System) >> Repair Instructions >> Strut Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Strut To Spindle View
    GM175765Courtesy of GENERAL MOTORS CORP.
  1. Loosely install the strut to knuckle bolts (5) and nuts (3).
    2. Fig 2: View Of Strut Mount To Body Nuts & Bolts
    GM175764Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Align the scribe marks in order to ensure proper alignment.
  2. Install the strut to body bolts (3) inside the fender well.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the strut mount to body nuts (1) in the trunk area.

    Tighten: 

    • Tighten the nuts to 25 N.m (18 lb ft).
    • Tighten the strut to knuckle nuts to 120 N.m (89 lb ft).

  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
  6. Check the wheel alignment. Refer to Measuring Wheel Alignment in Wheel Alignment.
scientia non olet · About LEMON Manuals