Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ground cable.
- Install the nut to retain the ground cable to the bellhousing stud.
- Install the front transmission mount. Refer to Transmission Mount Replacement - Front in Automatic Transmission.
- Install the lower closeout panel.
- Lower the vehicle.
- Install the negative cable to the retainers.
- Tape the positive cable and ground strap to the negative cable.
- Install the bolt to retain the ground cable to the core support.
- Connect the negative ground cable (2). Refer to Battery Negative Cable Disconnect/Connect Procedure .