LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Washer Solvent Container, Electrical Connector & Screws
    GM796928Courtesy of GENERAL MOTORS CORP.
  1. Position the washer solvent container to the frame rail.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the washer solvent container screws.

    Tighten:  Tighten the screws to 6 N.m (53 lb in).

  3. Connect the washer solvent level sensor electrical connector.
  4. Connect the washer hose to the washer pump.
  5. Connect the washer pump electrical connector.
  6. Install the air cleaner intake duct. Refer toAir Cleaner Intake Duct Replacement in Engine Controls-2.2L or Air Cleaner Intake Duct Replacement in Engine Controls-3.4L.
  7. Fill the washer solvent container with washer solvent.
scientia non olet · About LEMON Manuals