LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Cupholder Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of I/P Cupholder
    GM706203Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P cupholder to the I/P carrier.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the I/P cup holder screws to the I/P cup holder.

    Tighten:  Tighten the screws to 2.3 N.m (20 lb in).

  3. Install the screw to the side of the I/P cupholder.

    Tighten:  Tighten the screw to 2.3 N.m (20 lb in).

  4. Install the driver side I/P outer trim cover.
scientia non olet · About LEMON Manuals